MODEL INFORMATION
Capacity up to Ø 63.5mm, equipped with
6 electric servos. 3 stacks of tooling with material
booster & CUT OFF after bending
PRODUCT INFORMATION Features &
Functions:
Servo controlled axes :
1.
Feeding ( Y )----- Fully electric servo
2.
Planning ( B )----- Fully electric servo
3.
Transverse Movement ( X ) ----- Fully electric servo
4.
Pipe Bending ( C ) ----- Fully electric servo ( 6A Type )
Hydraulic proportional servo valve ( 6B Type )
5.
Pressure Die Assist ( V1 ) ----- Fully electric servo ( 6A Type )
Hydraulic proportional servo valve ( 6B Type )
6.
Material Booster ( V2 ) ------ Fully electric servo ( 6A Type )
Hydraulic proportional servo valve( 6B Type )
7.
Pressure Die Assist Clamping Force ----- Hydraulic Proportional servo valve
Material Booster for wall thinning ratio control :
1.
Wall thinning ratio is <=15% at 1D bending (*)
2.
Wall thinning ratio is <=12% at 1.5D bending (*)
Material Booster, Pipe Bending, and Pressure Die Assist Booster are all automatically adjusted by the proportionally controlled, optimizing efficiency and minimizing any surface damages
Final-Bend material booster mechanism is during the final part of the bending process, the material booster provides an additional "PUSH", allowing every bending to fulfill wall thinning requirements
Axis Y, B, X may be simultaneously moved and controlled. Axis C, V1, V2 may be simultaneously moved and controlled
Servo controlled transverse movement ( X axis )minimizes set up time, removing the need for stopper adjustment when changing tooling stacks
Three stacks (3 X Radius) bending, with ability to use 3 stacks of compound tooling for short clamping distances and complex bends
Powerful coolant to control the hydraulic system temperature in order to provide stabilitythroughout the bending process (Optional)
